Epoxy Flooring in Millcreek, UT
Salt Lake City Superior Epoxy Flooring provides professional epoxy flooring in Millcreek, UT. We install garage floor epoxy, flake epoxy floors, polyaspartic coatings, basement floor epoxy, metallic epoxy and polished concrete, and we handle epoxy floor repair, strip-and-recoat jobs and patio coatings. Every floor is diamond ground to ICRI CSP 2-3 on HEPA extraction, never acid etched.
Millcreek only became a city on December 28, 2016, but most of its neighbourhoods were built out by the 1980s. With 63,380 people at the 2020 census, it's a city of established homes, and established homes come with floors that have a history.
Free Estimate in Millcreek
Or call (385) 622-8922
Recoating Older Millcreek Garage Floors
In a lot of Millcreek garages, we're not the first ones to put something on the floor. We find porch paint, old epoxy that's ambered by the door, and box-store kits lifting at the edges. None of it gets coated over.
A failed coating gets ground off to bare concrete before anything new goes down. A strip and recoat runs $6.50 to $9.50 per sq ft, grinding included, and carries the same 15-year warranty as a new flake floor.
If the old floor is still well bonded and just worn, a topcoat refresh can be enough. We check the bond with a scraper at the edges and a few hammer taps before we recommend anything, and spot repairs run $350 to $900 a visit.
Sometimes the right answer is neither. A coated floor that just looks dull often comes back with a pH-neutral cleaner and a microfiber mop, and we'll tell you so on the phone.
Canyon Rim, East Mill Creek and Olympus Cove Homes
Canyon Rim took shape after World War II as farmland was subdivided, and the name caught on as homes went up near the rim of Parleys Hollow in the 1950s. Many of those houses are around seventy years old now, and so are their basement and garage slabs.
East Mill Creek sits near the mouth of Mill Creek Canyon and holds some of the area's earliest settlement, while Olympus Cove climbs the eastern foothills on land that was once orchards and grazing. Different eras, same rule: every basement gets a free moisture test before we quote.
We test with ASTM F1869 calcium chloride domes for 60 to 72 hours or ASTM F2170 RH probes read after 24. Over 3 lbs or 80% RH, a moisture-mitigating primer goes in first, adding $1.50 to $3 per sq ft.
Millcreek's seasons swing hard, from hot summers to cold winters. From November through March, unheated garages get polyaspartic, which goes down on a slab as cold as 40°F, and in summer that same aliphatic top keeps the apron from ambering in the afternoon sun.
Repairs and New Floors in Millcreek



Businesses Along Highland Drive and 3300 South
Millcreek's commercial strip runs along Highland Drive, 3300 South and 3900 South, and the new city center around Millcreek Common keeps adding restaurants, shops and offices.
Restaurant kitchens get urethane cement with an integral cove base at $10 to $16 per sq ft. Retail floors and offices often go polished concrete, and restrooms get quartz broadcast epoxy. Night and weekend installs cost nothing extra.
From Millcreek, our crews are minutes from Holladay, UT, and we cover the rest of the valley the same week. Installs run 7 to 14 days out.
Getting a Floor Done in Millcreek
Phone (385) 622-8922 during open hours and you'll hear back within 2 business hours. Jared Nielsen or our estimator visits within 3 business days, and you'll have an itemized quote by email the same day.
We start by diamond grinding with HEPA extraction. We chase and fill cracks, repair spalls, and grind them flush. After that, we apply the base coat, broadcast flake to rejection, and finish with a clear polyaspartic topcoat. We coat stem walls up to 12 inches tall at no extra charge.
We're licensed through the Utah Division of Professional Licensing (DOPL) and insured. No subcontractors, ever: the crew that grinds your floor is the crew that coats it.
Millcreek Epoxy Flooring Questions
My address says Salt Lake City, but I live in Millcreek. Do you serve me?
Yes. Many Millcreek homes still use Salt Lake City mailing addresses in the 84106, 84107, 84109, 84117 and 84124 ZIP codes. Same crews, same prices, same lead times.
Can you coat over the old paint on my garage floor?
No. Paint and old kits get ground off to bare concrete first, because a new coating is only as strong as whatever sits under it.
My old epoxy has yellowed by the garage door. Can it be fixed?
If the old coating is still bonded, we abrade it and apply an aliphatic polyaspartic topcoat to prevent ambering. If it's peeling, you'll need a strip and recoat at $6.50 to $9.50 per sq ft.
Do you work on foothill homes in Olympus Cove?
Yes. Garages, basements and patios up the foothills get the same grind, moisture testing and warranty as anywhere else in the valley.
Do you install restaurant kitchen floors on Highland Drive?
Yes. For kitchens, we install urethane cement with an integral cove base. We can do these installs on nights or weekends so you don't lose service days.
Book a Millcreek Floor Estimate
Call (385) 622-8922 or send the form, and tell us what's on the floor now. We call back within 2 business hours.
