Serving Salt Lake City and the Salt Lake Valley since 2006
Licensed & InsuredFree EstimatesMon-Fri 7am-6pm
(385) 622-8922 Licensed & Insured
Get a Free Floor Estimate
Metallic Epoxy Floors in Salt Lake City, UT

Metallic Epoxy Floors in Salt Lake City, UT

Salt Lake City Superior Epoxy Flooring offers professional metallic epoxy floors in Salt Lake City, UT with 20 years of experience and a crew that hand-works every metallic pour. A metallic floor is 100% solids epoxy loaded with metallic pigment, poured at about 30 mils and moved with rollers, brushes and air while it's wet. The pigment settles into that movement and leaves a depth you can't get from flake or paint.

Metallic epoxy belongs indoors: basement family rooms, home bars, studios, salons and showrooms. Each floor is a 3-day install, with a clear polyaspartic or urethane topcoat on the last day for scratch and UV protection. Metallic epoxy floors run $9 to $14 per sq ft depending on color count and design, and carry a 5-year warranty against peeling and delamination.

Get a FREE Estimate

Or call (385) 622-8922

  • Poured at about 30 mils and worked by hand
  • Sample board in your colors before we pour
  • Moisture tested first on every basement slab
  • UV-stable clear topcoat so colors stay true

Metallic Epoxy Floor Styles

Every metallic floor is one of a kind, but most fall into one of these looks. We make a sample board in your colors so you see the style before it's on your slab.

Single-Color Metallic Epoxy

Single-Color Metallic Epoxy

One metallic pigment over a tinted base gives a soft, shifting sheen without a busy pattern. It's the easiest metallic to live with in a large basement family room. It also sits at the lower end of the $9 to $14 per sq ft range.

Marble-Look Metallic Epoxy

Marble-Look Metallic Epoxy

A light base with darker veins pulled through by hand reads like a polished stone slab with no grout lines. It suits home bars, entries and studios. The veining takes more time to work, so it lands mid-range on price.

Swirl and Lava Metallic Epoxy

Swirl and Lava Metallic Epoxy

Two or three colors moved hard with rollers and air make deep swirls and cells. It's the dramatic look people see online. Expect the upper end of the range, because more colors mean more labor on day 2.

Multi-Color Metallic Floors

Multi-Color Metallic Floors

Bold mixes like charcoal with copper, or silver with blue, give a room a strong focal point. We test the mix on the sample board first, since metallic pigments look different wet than cured.

Metallic Epoxy for Showrooms, Salons and Bars

Metallic Epoxy for Showrooms, Salons and Bars

Businesses use metallic epoxy where the floor is part of the look. We install on nights and weekends at no surcharge so you don't lose a day of sales. Commercial metallic floors carry our 3-year commercial workmanship warranty.

Before and After

Concrete slab with tile adhesive ridges in a Cottonwood Heights, Utah kitchen
Pearl white and gray marble-look metallic epoxy floor in a contemporary Utah kitchen
Typical before and after: a slab with old tile adhesive turned into a marble-look white and gray metallic epoxy floor.

Where Metallic Epoxy Works and Where It Doesn't

Metallic epoxy is a design floor. It's at home in a finished basement, a home theater, a bar, a studio or a showroom, anywhere people walk in socks or clean shoes.

It doesn't belong in a garage. Hot tires, road salt grit and dropped tools are hard on any glossy finish, and a metallic floor shows scratches the way a dark car shows swirl marks. If you want a tough garage floor with some style, flake is the better pick.

Big windows matter too. Aromatic epoxy ambers in UV, and a south-facing walkout basement can put a lot of sun on part of the floor. That's why every metallic floor we install gets a clear UV-stable topcoat, and why we talk through window placement at the estimate.

Basement Slabs Under a Metallic Floor

Most metallic floors we pour are in basements, and basement slabs come with history. Old carpet glue, tack strip holes, paint and leveler patches all have to be ground off or filled before we pour, because metallic epoxy shows every bump under it.

Moisture comes first. Every basement gets a free ASTM F1869 calcium chloride or ASTM F2170 RH test. Over 3 lbs or 80% RH, a moisture-mitigating primer goes down before the metallic layer, adding $1.50 to $3 per sq ft. Skipping it is how basement coatings end up bubbling.

We also check flatness. A metallic pour settles toward low spots, so a basement slab with a dip near the floor drain gets ground or patched first. Floor drains stay open and get a clean edge.

Choosing Colors and a Topcoat

Color count drives price. A single metallic over a tinted base is the simplest pour, and every extra color adds working time on day 2. That's most of the spread between $9 and $14 per sq ft.

The topcoat changes how the floor lives. Gloss shows off the depth of a metallic pour, and satin hides fine scratches and dust better. Pets with long nails and rolling office chairs are the most common scratch makers, so put felt pads on furniture and a mat under any desk chair.

Clean a metallic floor with a dry dust mop and a damp microfiber mop with a pH-neutral cleaner. Skip vinegar, ammonia and steam mops on it.

Our Metallic Epoxy Installation Process

  1. Test and sample

    We moisture test basement slabs and make a sample board in your colors, so you sign off on the look before day 1.

  2. Day 1: grind and prime

    Diamond grinding to CSP 2-3 with HEPA extraction, glue and patch removal, crack and low-spot repair, then the 100% solids epoxy primer.

  3. Day 2: the metallic pour

    The crew applies the metallic pigment epoxy at about 30 mils. They work the material by hand using rollers, brushes, and air until the pattern sets.

  4. Day 3: clear topcoat

    A clear polyaspartic or urethane topcoat in gloss or satin protects the color. This layer adds scratch and UV resistance.

  5. Cure and move back in

    Walk in socks at 24 hours, move furniture back at 72, and hold off on rugs until the full 7-day cure.

Metallic Epoxy Floor Questions

Can metallic epoxy go in a garage?

We don't recommend it. Hot tires, salt grit and dropped tools scratch and scuff a glossy metallic finish fast. A full-broadcast flake floor is the better garage floor.

Will my floor look like the photos I saved?

Your floor will look like your sample board, not a carbon copy of another house. Metallic patterns depend on how the pigment moves on your slab that day. No two floors match, not even two of ours.

How do I keep a metallic floor from scratching?

Use felt pads under furniture and a mat under rolling chairs. Keep pet nails trimmed and choose a satin topcoat if you worry about scratches. Most damage comes from grit tracked in on shoes, so put a rug at the stairs.

Can you pour metallic epoxy over old carpet glue?

Not over it. We grind the glue, paint and old patches off first, because anything left under a metallic pour shows through the finish.

How long before I can put furniture back?

Seventy-two hours after the topcoat. Walk on it in socks at 24 hours, and wait until day 7 for rugs, so nothing traps the coating before full cure.

Start a Metallic Epoxy Floor With a Sample Board

Call (385) 622-8922 or fill in the form. We'll test your slab, discuss colors, and email an itemized quote the same day.